this is information on a product in full production. february 2014 docid022325 rev 1 1/7 dsl03 secondary protection for vdsl2 lines datasheet - production data features ? high surge capability to comply with gr-1089 and itu-t k20/21 ? voltages: 10, 22 and 24 v ? low capacitance device: c typ = 0.5 pf ? rohs package ? low leakage current: 0.2 a at 25 c complies with the following standards ? telcordia gr-1089 ? 2.5 kv 2/10 s - 500 a 2/10 s ? ac power fault tests ? itu-t k20/21/45 ? 6 kv 10/700 s - 150 a 5/310 s ? power induction tests ? power contact tests ? iec 61000-4-2, level 4 ? 15 kv (air discharge) ? 8 kv (contact discharge ? mil std 883g-method 3015-7: class 3 ? 25 kv (human body model) description dsl03 is designed to protect dsl line drivers against surges defined in worldwide telecommunication standards. this device protects line drivers of various systems such as adsl and vdsl. the low capacitance makes it suitable from adsl to vdsl2 data rates. dsl03 is able to survive severe conditions even when used with downgraded or oscillating gas tube. dsl03 is packaged in a sot23-6l. figure 1. functional diagram sot23-6l i/o1 -v ld +v ld +v ld +v ld i/o2 www.st.com
characteristics dsl03 2/7 docid022325 rev 1 1 characteristics table 1. absolute ratings (t amb = 25 c) symbol parameter value unit v pp peak pulse voltage iec 61000-4-5 contact discharge 30 kv i pp peak pulse current 8/20s 16 a t stg t j storage temperature range operating junction temperature range -55 to 150 -40 to 125 c c t l maximum temperature for soldering during 10s 260 c table 2. electrical characteristics (t amb = 25 c) order code i rm @ v rm i/o to i/o v br @ i br i/o to i/o v cl @ i pp 8/20 s i/o to i/o c i/o to i/o c i/o to i/o c i/o to i/o max. a v min v ma max. v a typ. (1) pf max. (1) pf typ. (2) pf DSL03-010SC6 0.2 10 10.5 1 29 16 0.5 3 0.2 dsl03-022sc6 0.2 22 25 1 52 16 0.5 3 0.2 dsl03-024sc6 0.2 24 28 1 55 16 0.5 3 0.2 1. test conditions: v r = 2 v bias, v rms = 1 v, f = 1 mhz 2. measured between 1 v and v rm figure 2. peak pulse power dissipation versus initial junction temperature (typical values, 8/20s) figure 3. leakage current versus junction temperature (typical values) 0 100 200 300 400 500 600 700 800 900 1000 0 25 50 75 100 125 150 p pp (w) 8/20 s t j (c) 1.e+00 1.e+01 1.e+02 1.e+03 25 50 75 100 125 t j (c) v r =v rm (na)
docid022325 rev 1 3/7 dsl03 characteristics 7 figure 4. junction capacitance versus reverse voltage applied (typical values) 0 1 2 3 4 0 2 4 6 8 1012141618202224 vr(v) f=1 mhz v osc =1v rms t j =25 c for lower voltages, maximum voltage applied is limited to v rm dsl03-024sc6 (pf)
package information dsl03 4/7 docid022325 rev 1 2 package information ? epoxy meets ul94, v0 ? lead-free package in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 5. sot23-6l wide dimension definitions a2 a l h c b e d e e a1 q
docid022325 rev 1 5/7 dsl03 package information 7 table 3. sot23-6l dimension values ref. dimensions millimeters inches min. max. min. max. a 0.90 1.45 0.035 0.057 a1 0 0.10 0 0.004 a2 0.90 1.30 0.035 0.051 b 0.35 0.50 0.014 0.020 c 0.09 0.20 0.004 0.008 d 2.80 3.05 0.11 0.118 e 1.50 1.75 0.059 0.069 e 0.95 0.037 h 2.60 3.00 0.102 0.118 l 0.10 0.60 0.004 0.024 0 10 0 10 figure 6. footprint recommendations dimensions in mm figure 7. marking layout 0.95 0.60 1.20 1.10 3.50 2.30 x x x x
ordering information dsl03 6/7 docid022325 rev 1 3 ordering information figure 8. ordering information scheme 4 revision history table 4. ordering information ordering code marking package weight base qty delivery mode DSL03-010SC6 st10 sot23-6l 17.3 mg 3000 tape and reel dsl03-022sc6 st22 dsl03-024sc6 st24 dsl 0x - vvv sc6 dsl protection version stand-off voltage package 10 = 10 v sc6 = sot23-6l table 5. document revision history date revision changes 07-feb-2014 1 initial release
docid022325 rev 1 7/7 dsl03 7 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
